What Do I Need To Pay Attention To The Charcoal Raw Material?

Mechanism charcoal is a finished carbon rod made by charcoal making machine. It is an environmentally friendly and efficient fuel. It is widely used in barbecue, cooking, heating, biomass energy, industrial heat source and so on. If you want to produce high quality product charcoal sticks. It is necessary to strictly control the quality of raw materials and production and processing technology. The following are three situations that need to be paid attention to the charcoal raw materials for the production of charcoal in charcoal making machine. Provide corresponding solutions to these problems.


High humidity of raw materials:
Raw materials with high humidity will produce a lot of water vapour and smoke during the carbonization process. It will affect the quality of the finished carbon. It also reduces the carbonisation efficiency. If the humidity is too high it will also cause cracks in the carbon rods during carbonisation, which will lead to the fragmentation of the carbon blocks. It directly affects the strength of the whole set of finished charcoal.

     1. Raw materials need to choose dry and fresh wood raw materials.
     2. If the humidity is too high the material needs to be pre-treated. It can be dried by natural drying or dryer. Thus reducing its moisture content.


High impurity content in the raw material:
If there are a lot of impurities in the wood raw material, such as: stone, sand and soil. In the carbonisation process not only will not be converted into charcoal. It may also damage the carbonisation furnace. At the same time, the impurities will directly affect the purity and combustion efficiency of the finished charcoal.

     1. Purchasing wood raw materials should strictly control the content of impurities. Choose wood raw materials with high purity.
     2.Before making charcoal, sieve and clean the raw materials. Remove the impurities in them.


Raw material particle size is too large:
If the particle size of the wood raw material is too large. It is difficult to be heated evenly during the carbonisation process. It is easy to lead to incomplete carbonisation or too long carbonisation time and so on. Not only reduce the charcoal production efficiency. It also affects the quality and uniformity of the finished charcoal.

      1. If the raw material particle size of the wood raw material is too large, it needs to be crushed first. It is necessary to ensure that the particle size of the raw material is uniform and moderate in size.
      2.By adjusting the process parameters in the carbonisation process. The carbonisation time can be extended or the carbonisation temperature can be increased. So as to ensure that the raw materials with large particle size can be fully and completely carbonised.

  In the charcoal production process, other methods can also be used to improve the quality of the finished product. For example, optimising the carbonisation process, choosing carbonisation furnace with advanced technology, and so on. At the same time, it is necessary to ensure strict control of raw material procurement. To produce high quality mechanism charcoal products. It is necessary to strictly control the selection of raw materials, pretreatment, carbonisation and other aspects. Ensure the production of high-quality, high-efficiency mechanism charcoal.

• Perv: How To Increase The Capacity Of Charcoal Making Machine?
• Newxt: Why Avoid Overnight Raw Materials For Charcoal Making Machine?